Email :

Phone : +971 4 258 3361

Terraco provides high quality, environmentally friendly construction finishing materials, for both interior and exterior. A statement in architectural elegance, variety in design, texture, style and colour. A comprehensive range of quality interior and exterior coatings including paints, decorative effects and textured coatings, all are formulated to have superior weathering and ageing characteristics while providing an unrivalled aesthetic finish.

Terraco has long specialised in acrylic, siliconised, elastomeric wall coatings, mineral based coatings, designed to provide long-life protection to a building and striking decorative finishes while simultaneously catering to the individual design needs of the architect and interior designer.

* Designer Collection (interior decorative coatings)

* Exterior Performance Coatings

* Exterior Insulation Finishing System (EIFS)

Terragrout ( Variety of colours)

A range of easy to use, high performance, polymer modified cementitious grouts for filling thin joints (5 mm and less) and wide joints (5 mm to 20 mm) in exterior and interior floor and wall tiles. The Terragrout range does not curl up during application and gives a water- and weather-resistant joint with no shrinkage cracks. All colours are light and lime fast.

Weathercoat™ (White and Grey)

waterproofing products are a range of versatile, permanent, positive pressure, waterproofing systems for roofs, facades, water tanks, foundations and more. They will adhere to new and old surfaces of concrete, bitumen, and tiles. Used in extreme climatic conditions, Weathercoat™ has long-life flexibility. It is applied by brush or spray and after drying can be walked upon uncovered. After application, Weathercoat™ has high resistance to chemical attack, atmospheric pollution and UV light. These products are used across the globe in a wide range of applications including wet areas such as bathrooms and kitchens to balconies, swimming pools and potable water tanks and much more.

Terrafix (Grey and White)

General purpose ceramic and mosaic tile adhesive for use on all type of dimensionally stable masonry substrates such as sand/cement screed, precast concrete etc.

Terrapaste™ (Ready-Mix)

General purpose, non-slump ceramic and mosaic tile adhesive for use on all type of interior walls such as gypsum board, cement based render, tile backer board.


It is a ready-mix, flexible, seamless, positive pressure, waterproofing roofing compompound. This product is used on roofs across the globe – consistently performing in the most demanding conditions, including the monsoon areas of the world.

Handycoat® – Skimming and Jointing Compounds (Ready-mix)

Gypsum based plaster board is today one of the dominant construction materials for light weight structures in homes and commercial premises. Handycoat products are ideally suited as a gypsum board jointing compound and as a skimcoat on walls and ceilings. Handycoat Lite is the light weight version of the original Handycoat® products - 30% lighter!

Handycoat products are highly versatile and are used by plasterers and painters for patching hairline cracks, repairing damage to plaster and paint work, filling nail holes in wood work, for making good around door and window architraves and for filling along the top of skirting boards – to name but a few popular usage areas. Handycoat products are easy to sand and are designed to reduce the amount of dust suspended in the air.

Styrobond DP

A polymer modified dry-mix embedding mortar applied over EPS (expanded polystyrene), XPS (extruded polystyrene) or mineral wool panels to embed the glass fibre mesh prior to application of finish coats. It has superior mechanical properties due to its high polymer modification. Can also be used as an adhesive for fixing insulation boards to masonry surfaces.

Styrobond DP FM

A fibre-modified polymer modified basecoat specially designed to be applied directly onto profiled XPS / EPS such as decorative cornices where it is not possible to embed glass fibre mesh sheet.

Terrabond A

For use with all cementitious materials, lime washes, plasters, etc. to pre-treat substrates as an adhesion-promoting agent and as a primer/ sealer for decorative coatings. It can be used with confidence on all exterior and interior surfaces.

An Exterior Insulation Finishing System (EIFS) can be defined as an energy efficient thermal wrapping applied to the exterior surfaces of a building. This thermal wrapping is then finished with a long-life, decorative and protective coating system.

Terraco EIFS has been developed, tried and tested for use in both hot and cold climates and is proven to substantially reduce heating or cooling costs as well as allow for the use of lower specification heating or cooling systems.

Epirok™- Epoxy Floor Coatings

Epirok™ is ideally suited for use on suitably prepared concrete floors in a variety of demanding applications such as:

    • Workshops

    • Car Parks

    • Cold storage and food processing facilities

    • Showrooms

    • Assembly Halls

    • Warehouses

    • Aircraft Hangers

    • Industrial Plants

    • Engineering Workshops

    • Heavy traffic areas


Terraco Sprayplaster™ can be used on all types of concrete surfaces, aerated light-weight concrete elements and blocks, sand cement render, fair-face concrete block walls, fair-faced and concrete block soffits and more.


A Coloured mineral plaster, which is applied in a single coat to give an attractive decorative finish. It has excellent dirt pick-up resistance and is extremely stable against UV light even in severe climatic conditions.


An acrylic based topcoat range available in a variety of grades designed for exterior facade coating. It has good dirt pick-up resistance as it forms a tough hydrophobic film when dry.

Emulsion Paint

Terraco’s high quality interior and exterior paints are all water-based and environmentally friendly, low VOC and low odour - produced using the latest paint technology.

Terraco interior and exterior paints cover most requirements in the construction industry ranging from the domestic to industrial and commercial applications. Terraco paints provide unbeatable long-term value and superior ageing characteristics and are available in a wide range of aesthetically pleasing colours.

Terrashield is a high-quality, high washable, weather-resistant acrylic paint, suitable for use on exterior and interior surfaces of concrete, plywood, anti-rust steel and more.

Terralux is a premium quality, highly washable, acrylic bound, matt emulsion with high opacity suitable for use on most interior and exterior building surfaces.

Terragene is a high quality, anti-gungal, weather resistant, highly washable, acrylic paint suitable for use on most exterior and interior building surfaces. Excellent for use in humid areas prone to fungal growth.

Terratop is a high quality, highly washable, interior or exterior grade, vinyl emulsion silk paint with a luxurious satin finish.

Terralast is a high quality , washable, matt emulsion , with high coverage suitable for application on most interior building surfaces.

Leveller and Fillers

Handy Coat Exterior- Ready-mixed skimcoat for leveling exterior masonry and cement fibre board surfaces

Handycoat Interior - General purpose ready-mixed skimcoat and jointing compound for leveling interior masonry and gypsum board surfaces